Products/Services

DialAnywhere Phone (broadband or Dial-UP)

Only $89.00 (Broadband & Dial-Up)

Buy Now - Credit Card
Goods and services provided by CallOnThe.Net (MI, United States). Sold by 2CheckOut.com Inc. (Ohio, USA).

Click Here to Pay by Western Union, Money Gram, Paypal or Wire Transfer

Category: Broadband or Dial-Up (56K)
Dual-Use IP Phone
Description:

DialAnywhere Phone™ is a state-of-the-art IP desktop phone incorporating ergonomic design, ease-of-use functionality, and the full power of IP telephony on the desktop. With a built in dial up modem it can be used with or without high-speed broadband connection. The user can select either IP network or the PSTN, whichever is the least cost for each call.

The built-in dual port Ethernet switch can be used to connect the PC and IP phone on the same 10/100 base-T LAN, reducing wiring costs and complexity. The IP Phone also has a PSTN port, allowing you to dial out on the IP network through 56K build in modem.

DialAnywhere Phone™ interoperates with any standards-compliant H.323 / SIP / MGCP VoIP terminals and Gatekeepers. Its large LCD gives you the status display in easy to read format in context of the current operation. Intuitive menus allow easy configuration and setup.

Call control protocols H.323 v4 / MGCP RFC2705&3435 / SIP RFC2543&3261
Use any Dial-Up (56K modem, ADSL/Cable Modem) or broadband internet connection (LAN) to call worldwide.
Configurable phone number assignment to match various dial plans
Recharge function that allows users to top up their account through the easy payment mode and to provide real time account balance displaying
Set by HTTP web browser, advanced setting by Telnet, Upgraded by FTP/TFTP
Interoperable with standards-based gatekeepers and gateways: like OpenH.323 GK, Radvision GK, Cisco IOS GK, Quintum Tenor GK / GW, Cisco ATA18x / 26xx / 36xx / 53xx GW, AudioCodes MP-1XX GW, Altigen IP PBX, Lucent ESE/VSE Softswitch ,Sonus Softswitch, and etc.

TOP

SPECIFICATIONS

Hardware specification:

One PSTN port; built-in V.90 modem RJ11 connector (data rates from 14.4K bps to 56K bps)
Dual 10/100 based-T Ethernet , full duplex; RJ45 connector
With 2 x 24 character mode LCD for the status and account balance displaying.
12 alphanumeric keypads and 9 function keys: Spk, Mute, Volume up, Volume down, Redial, Speed Num, Balance, Call Record, Voice Msg
6 LEDs to indicate different Phone status; Call Record, Voice Msg: ,Ethernet Status ,Power Status, Spk, Mute.
4 programmable soft keys
Audio CODEC: G.711u, G.711a, G.723 5.3k/6.3k, G.729, G.729a, G.729b, G.729ab
Power Adaptor: 100V ~ 240Vac input, +5Vdc output.

H323 Protocol:

ITU-T H.323 v4 support, compatible with most H.323 v1-v4 systems and devices
Support different E.164 registration format (E.164, H.323 ID ,MAC address) and dialing format
Built-in H.323 proxy to pass NAT
Faststart and H.245 tunneling
Outband DTMF transmit by H.245 user input or Q.931 keypad
Caller ID send and receive by Q.931
H.235 security authorization based on MD5
Alternate gatekeeper selection
Provide direct IP to IP call mode, including direct PSTN call by a gateway
Automatically gatekeeper discovery in LAN

SIP Protocol:

IETF RFC3261 (SIP:Session Initiation Protocol)
IETF RFC 2976 (SIP INFO Method)
IETF RFC 2327 (SDP: Session Description Protocol)
IETF RFC 3264 (An off/answer model with the Session Description Protocol)
IETF RFC 1889 (RTP: Real-time Transport Protocol)
IETF RFC 1890 (RTP profile for audio and video conferences with minimal control)
IETF RFC 2833 (RTP payload for DTMF digits, telephone tones and signals)
Support inband DTMF tone send/receive with RTP
Supports out of band DTMF signaling based on RFC2833
IETF RFC 3489 (Simple Traversal of User Datagram Protocol (UDP) through network address translators (NATs)
IETF RFC 2617 (HTTP Authentication)